好像没有什么关键更新。。
<1.01>
- (New) Support for the Deep Smart Power Down feature.
The Deep Smart Power Down turns off a network interface card
when a link being down or a network cable being disconnected.
This function is available in the Windows XP and functions
when a system is in battery mode.
The feature will only work with the Intel PRO/1000 PL Network
Connection 9.2.43.0 (or later).
- (Fix) HV expansion state is always on regardless of the setting of
the BIOS setup.
- (Fix) ATI Display property does not show a correct memory type.
<1.02>
- (Fix) Shutdown function does not work on the DOS.
<1.03>
- (New) Support for new devices.
- (Fix) When a T60 system is warm docked to a ThinkPad Advanced Dock
with a hard drive installed, a Hard Disk Password will not
prompt and the hard drive does not unlock.
- (Fix) When a LCD lid is closed and opened again, a screen
resolution may change. This will happen only on the Intel
Graphics Media Accelerator 950 models only.
<1.04>
- (Fix) Ethernet device does not work intermittently after resuming
from standby in battery mode. Deep Smart Power Down feature
is temporary disabled.
<1.05>
- (New) POST 2100 error is subdivided to show individual error
message for hard drive.
- (Fix) Support for the Deep Smart Power Down feature.
Note: The feature will only work with the Intel PRO/1000 PL
Network Connection 9.2.50.0 (or later).
- (Fix) Data Execution Prevention is not correctly disabled in BIOS
Setup utility.
- (Fix) Performance degradation occurs on infrared device at 4M bps
transfer rate.
<1.06>
- (New) 1920x1200 resolution display support for Intel video models.
- (Fix) Incomplete docking actions may happen.
Devices plugged into the docking station side are not
recognized.
- (Fix) Muting beep sound does not work upon entering standby.
- (Fix) Improved frame drop during DVD playback in battery mode.
- (Fix) Wrong characters may be input when you enter information
with an external PS/2 type keyboard via Y-Cable.
- Numeric characters (2, 4, 6 and 8) will be inserted
intermittently during cursor move with cursor keys.
- A keyboard behaves as if a shift key is pressed until
a shift key is actually pressed.
- You can only type Uppercase characters. (Some keys
seem to be input, because the shift cases are not
defined)
- Multiple selection with cursor keys.
- Numeric keypad will turn to cursor keys.
<1.07>
- (New) "Intel Inside" Logo is updated.
- (Fix) POST 1820 error occurs on the following system condition.
- Wireless WAN model, and
- Wireless WAN is disabled by BIOS Setup or Wireless hardware
switch (BIOS Setup->Config-> Network->Internal Wireless
Device), and
- An external USB Finger Print reader is connected to the
left side USB port of the system or any USB port in the
docking station.
- (Fix) When the Password reset service of BIOS Setup is enabled
(BIOS Setup->Security->Password->Password Reset Service) and
Passphrase is disabled (BIOS Setup->Security->Password->Using
Passphrase), POP(Power On Password) or HDP(Hard Disk
Password) may not be unlocked with a registered password by
the Password reset service.
Note: Some 15inch XGA(1024x768) LCD will not display correctly with
BIOS version 1.06 or previous. Please use version 1.07 or
later for this case.
<1.09>
- (New) Upgraded to latest microcode update for Intel Core processor.
- (Fix) Entering standby may fail in a certain case. USB host controller
setting is changed to fix.
- (Fix) Fails to boot from a USB device while the global switch being off.
- (Fix) USB device enumeration fails at hot dock after undock without eject PC.
- (Fix) Stops checking battery voltage for a while after starting trickle charge.
- (Fix) The EC intermittently hangs. (ThinkLight does not light)
- (Fix) The cooling fan may go high speed rotation for a while after switching to
the Maximum Battery Life mode.
- (Fix) Presentation Director can not switch to an external display when a
system fails to detect it.
<1.10>
- (Fix) Timeout may take more than 30 seconds if PXE (Preboot eXecution Environment)
network boot does not succeed. |
发表于 2006-10-12 10:01
| 
.